Our Services
Contract & OEM Manufacturing
QMEDICS contract manufacturing services consistently deliver quality assured products that meet tight specifications. Our extensive expertise and knowledge of international requirements helps to assure your product will be compliant with the harmonised standards and regional requirements. Our goal is to deliver customized products and personalized services, while providing flexibility and guidance to help our customers to achieve their goals in a timely, efficient, and cost-effective manner.
QMEDICS OEM and contracted manufacturing is a trusted partner with in-house stent and balloon development, manufacturing and clinical/regulatory capabilities.
We supply custom tailored products, solutions and technologies.
An overview of our Products Range
Unique Stent Characterization
The Qmedics new stent strategy is based on an innovative product technology, where every patient will get a stent with properties compliant with the lesion and the moveability of the artery.
The new Qmedics Stent-Delivery-System consists of 3 Variants "4F, 5F, 6F" deliverable in two types "PULL & FLEX".
The self-expanding Stent-Delivery-System is indicated to improve luminal diameter in patients with de novo- or restenotic symptomatic atherosclerotic lesions in peripheral arterial diseases.
The PULL Type is designed to provide optimal balance between compression resistance and longitudinal conformability.
Stent Type Selection/ Indications:
For lesions assessed to benefit from treatment with additional radial force or less bend flexibility the Pull type may be selected.
The TORQUE Type is intended to provide a optimal balance between radial compression resistance and torsion deformation. *In development*
The TORQUE Type is intended to provide a perfect balance between radial compression resistance and torsion deformation. The TORQUE Type is designed to avoid stent buckling and to provide an excellent patency within arteries subjected to torsion and radial compression.
Stent Type Selection/ Indications: *In development*
The FLEX Type is designed to provide a optimal balance between radial compression resistance and flexion deformation.
Stent Type Selection/ Indications
For lesions assessed to benefit from treatment with additional radial force or less bend flexibility the Pull type may be selected.
NOVA 4F
PTA Balloon Dilatation Catheter
The 418 BDC – PTA balloon The NOVA is a robust dual-lumen shaft balloon catheter with controlled compliance in diameters 2 to 6 mm and 40 to 220 mm length. The 2-lumen shaft combined with the low profile tip guarantees extreme flexibility and trackability. A broad size matrix will be delivered to treat a variety of vessel sizes and lesion types.
Read More
NAGA 5F
PTA Balloon Dilatation Catheter
The 518 BDC – PTA balloon The NAGA is a robust dual-lumen shaft balloon catheter with controlled compliance in diameters 4 to 7 mm and 40 to 220 mm length. Low profile opens access to small vessels and tortuous anatomy. The extra long usable of 175 cm length take you deeper into the anatomy and cross difficult lesions. A broad size matrix will be delivered to treat a variety of vessel sizes and lesion types.
Read More
MANATEE 6F
PTA Balloon Dilatation Catheter
The 635 BDC is a robust dual-lumen shaft balloon catheter with controlled compliance in diameters 4 to 10 mm and 40 to 220 mm length. Our 2-Lumen shaft has an inflation- and a guidewire lumen. Due to the balance between good trackability and pushability properties the catheter system as well owns short inflation- and deflation times.
Read More
ALBATROSS
Percutaneous Transluminal Sizing Balloon Catheter (PTA)
The Percutaneous Transluminal Sizing Balloon Catheter is designed for patients suffering from cardiovascular defect (PFO, VSD, ASD). The Sizing Balloon Catheter is used for accurate measurements of the PFO, VSD and ASD. These measurements are essential to define the appropriate size of an occluder. The Sizing Balloon is intended for venous access. The catheter is introduced directly via the guide wire. A guide catheter is not necessary. The Sizing Balloon has an ultra thin wall thickness to gain super elastic behaviour. Pressure is defined by volume. *In development* Read More
DRACO 4F
NiTi Stent Delivery System
The Qmedics portfolio is based on a “back to the basic” concept, where each product has been carefully designed to be compliant with lesion charasteristics and movability of the artery.
The DRACO 4F self-expanding Peripheral Stent has an open cell peak-to-valley design and comes in different characteristics. Thin stent struts for lower restenosis rate. Two tantalum marker at each stent end for proper visibility. Stent diameter from 4 to 7 mm and a length from 40 to 120 mm. Marker band on outer shaft and a radiopaque tip for absolutely controlled stent deployment. Long lesion treatment with a single stent. Multifunctional braided catheter for optimal balance between pushability, trackability and accurate stent placement.
* Type Pull and Matrix-Extension under Development
* In submission
Read More
FALCOR 5F
NiTi Stent Delivery System
The Qmedics portfolio is based on a “back to the basic” concept, where each product has been carefully designed to be compliant with lesion charasteristics and movability of the artery.
The FALCOR 5F self-expanding Peripheral Stent has an open cell peak-to-valley design and comes in different characteristics. Thin stent struts for lower restenosis rate. Two tantalum markers at each stent end for proper visibility. Stent diameter from 5 to 8 mm and a length from 30 to 200 mm. Marker band on outer shaft and a radiopaque tip for absolutely controlled stent deployment. Long lesion treatment with a single stent. Multifunctional braided catheter for optimal balance between pushability, trackability and accurate stent placement. Read More
EXIST 6F
NiTi Stent Delivery System
The Qmedics portfolio is based on a “back to the basic” concept, where each product has been carefully designed to be compliant with lesion charasteristics and movability of the artery.
The EXIST 6F self-expanding peripheral stent has an open cell design. Two tantalum markers at each stent end for proper visibility. Stent diameter from 5 to 10 mm and a length from 30 to 200 mm. Marker band on outer shaft for accurate stent deployment. Unique, multi-step electro-polishing technology creates a smooth surface. Multifunctional braided catheter for optimal balance between pushability, trackability and flexibility and accurate stent placement. Read More
BUSTARD
Valvuloplasty Balloon Catheter (PTV)
The Bustard Percutaneous Transluminal Valvuloplasty (PTV) Catheter is engineered for Interventional Cardiology. The PTV balloon dilatation catheter is designed for maximum steering and tracking. The distal part of the balloon catheter is highly flexible combined with a soft distal tip for exceptional maneuverability. The Bustard dilatation catheter is a PTV Balloon Catheter with a 2-lumen shaft construction and a non-compliant balloon which can easily be placed over a guide wire. The Bustard is a particularly high pressure balloon catheter.
*In development* Read More
QMEDICS 418
Balloon Dilatation Catheter
The Qmedics OTW 0.018” 4FR compatible PTA Balloon Catheter is a high performance balloon catheter for peripheral indication. The device features an ultra-low profile, semi-compliant balloon combined with a low profile tip and an improved shaft design, realize a better pushability for your ease of use especially in complex lesions, Tactile trackability for enhanced maneuvering and an excellent and fast deflation following the treatment.
Read More
QMEDICS 535
Balloon Dilatation Catheter
The Qmedics OTW 0.035” 5FR compatible PTA Balloon Catheter is a high performance balloon catheter for peripheral indication. This 5Fr portfolio is the workhorse of balloons for the use for above the knee interventions . With superior cross and track, powerful dilatation, longer lengths, and smaller sheath size. Choose from the broad sizes offered to treat peripheral arterial disease (PAD) in a variety of vessel sizes and lesion types. Deliver high-pressure, targeted treatment to challenging lesions with the 535 Qmedics PTA balloon catheter, a balloon designed and engineered for peak performance at rated burst pressure. Choose the Qmedics 535 Balloon catheter for interventions that requires a product with balanced push and track, optimal balloon shape retention at rated burst pressure, and a best-in-class tip entry profile.
Read More
QMEDICS 635
NiTi-Stent
Choose the Qmedics 635 self-expending peripheral stent-system for its combined benefits of durability and deployement accuracy – all in a broad range of sizes.
Use the Qmedics 635 as an adjunct to percutaneous transluminal angioplasty “PTA” in the treatment of symptomatic peripheral vascular deseases. Its expanded indications represent a significant clinical milestone in achieving optimal treatment strategy for chronic pancreatitis patients suffering from bile duct strictures.
Read More
EasyX
Liquid Embolic
The EasyXTM Liquid Embolics is a liquid polymer for embolization through small lumen delivery systems such as micro-catheters, occlusion balloon catheters and injection needles. After injection in liquid phase and upon contact with aqueous environment, the solvent rapidly dissipates in the surrounding tissue and the polymer precipitates in situ, providing a solid cast of the targeted vascular spaces.
Read More
Qmedics AG is a young Swiss-based medical device manufacturer founded in 2008. Our long year experience in the medical device industry has made us very flexible and highly capable of finding the optimum solution for every customer specific needs.
